Reactive impregnation wetting drives high-thermally conductive metals to form heat transfer channels on the surface of vertically aligned carbon nanotubes
Botao Li, Zhenwen Yang, Shiyu Niu*, Ying Han, Xibo Zhao, Ruiping Wang, Mengmeng Qin, Ying Wang*
Applied Surface Science, 2026, 729: 166149
2026 SCI Q1 IF 6.9
Enhancement of interfacial structure and mechanical properties of Zr-3 alloy and 304L stainless steel diffusion bonded joint via Ti interlayer introduction
Zhuofu Wei, Xiwen Hu*, Shiyu Niu, Yuxin Wang, Zhongliang Liu, Zhenwen Yang, Ying Wang*
Vacuum, 2026, 247: 115129
2026 SCI Q2 IF 3.9
Effect of Post-weld Heat Treatment on the Microstructure and Mechanical Properties of the Heat-Affected Zone of Alloy 617
Yuxin Wang, Zhaoqing Yang, Yu Gao, Chengning Li, Jing Ma, Yanwen Tao, Shiyu Niu, Zhenwen Yang, Ying Wang
Journal of Materials Engineering and Performance, 2026
2026 SCI Q3 IF 2
Residual stress and microstructure evolution of thin-walled Ti-6Al-4V fabricated by laser powder bed fusion in stress-relief annealing
Z Lan, Y Wang, Shiyu Niu*, W Yang, Ying Han, Z Yang
Journal of Alloys and Compounds, 2026
2026 SCI Q1 IF 5.8
Unveiling the microscopic origins of dual-phase HfTaC2/W ceramics with enhanced plasticity
C Zhang, K Cao, J Luo, X Zhu, J Liu, Ying Han, R He, Q Li, L Yang, Y Zhou
Science China Technological Sciences, 2026
2026 SCI Q1 IF 9.0
Grain boundaries amplify local chemical ordering in complex concentrated alloys
I Geiger, Y Tian, Ying Han, Y Bi, X Pan, P Cao, TJ Rupert
Acta Materialia, 2026
2026 SCI Q1 IF 9.4 被引 2
Superior high-temperature capacitive energy storage performance enabled by in situ grown nanodots in polymer nanocomposites
Y Li, Y Chen, Z Li, Y Cui, L Cheng, K Cao, Ying Han, W Liu, Y Zhou
Energy & Environmental Science, 2026
2026 SCI Q1 IF 32.0 被引 3
Deep Elastic Strain Engineering of Free-Standing GaN Microbridge
S Fan, H Wang, CT Chou, J Chen, Ying Han, J Zhou, X Li, JP Chou, J Li
Physical Review X, 2026
2026 SCI Q1 IF 14.0 被引 1
Excellent high-temperature strength of (HfZrTiTaNb)C high-entropy carbide diffusion-bonded joint via in-situ alloying of Ni/Nb/Ni composite interlayer
Ruijie Mu, Ying Wang*, Shiyu Niu, Kongbo Sun, Zhenwen Yang*
Journal of Advanced Ceramics, 2025, 14(1): 9221010
2025 SCI Q1 IF 16.6 被引 23
Microstructure and mechanical properties of SiC ceramics and Kovar alloy joints brazed with AgCuInTi and AgCuInTi plus B composite fillers
Wang Y, Yong Z, Sun K B, Wen Q, Niu S Y, Yang Z W*
Materials Characterization, 2025, 221: 114742
2025 SCI Q1 IF 5.5 被引 4
Refinement of microstructure and improvement of mechanical properties of directed energy deposited titanium alloys by adding Fe
C.L. Shi, Y. Wang*, M. Zhang, W.R. Yang, H.J. Li, Z.W. Yang*
Journal of Alloys and Compounds, 2025, 1010: 176996
2025 SCI Q1 IF 6.3 被引 9
Wetting behavior of Ti-Ni-xNb filler alloy on (HfTaZrNbTi)C high-entropy carbide ceramic
Kongbo Sun, Zhenwen Yang*, Shiyu Niu, Ruijie Mu, Ying Wang
Applied Surface Science, 2025, 679: 161243
2025 SCI Q1 IF 6.9 被引 3
Effect of hydrogenation on microstructure and mechanical properties of new zirconium alloy
Wang Y, Wang R P, Wang Z M, Xiao Z L, Niu S Y, Yang X, Yang Z W*
Intermetallics, 2025, 178: 108636
2025 SCI Q1 IF 4.8 被引 3
Enhancing diffusion bonding of Zr-4 alloy: The role of surface nanocrystallization in void closure and second phase particles suppression
Yang X., Wang Y. X., Yang Z. W., Hu X. D., Wang R. P., Li H. J., Niu S. Y.*, Wang Y.*
Journal of Alloys and Compounds, 2025, 1035(5): 181545
2025 SCI Q1 IF 5.9 被引 4
Stabilized interfacial structure induced by self-dissolved active atoms in the (HfZrTiTaNb)C high-entropy carbide brazed joint using CoCrFeNi alloy
Mu R J, Wang Y, Niu S Y, Sun K B, Yang Z W*
Ceramics International, 2025, 51(15): 20006-20015
2025 SCI Q1 IF 5.6 被引 2
Diffusion mechanism of Zr-4 alloy at ultra-low temperature based on the α→β phase transition promoted by thermo-hydrogen treatment
Ma Y K, Chang Q*, Ding H R, Sun Z, Guo X R, Long W M, Yang Z W, Wang Y, Zhang L X
Acta Materialia, 2025, 294: 121156
2025 SCI Q1 IF 9.3 被引 3
Enhancing the Tensile Properties of Inconel 625/TC4 Functionally Graded Materials Prepared by DualWire Arc Additive Manufacturing via Compositional Gradient
Hao L Y, Xu W, Liu X, Wang Z J*, Wang Y, He H
Metallurgical and Materials Transactions B, 2025
2025 SCI Q2 IF 3.1
Study on the Microstructure and Properties of Additive Manufacturing Al-Mg-Sc Alloy with CMT-PADV + Arc Weaving Process
Xu H F, Yang L J, Huang Y M*, Wang Y*
Journal of Materials Engineering and Performance, 2025, 331(15): 133499
2025 SCI Q3 IF 2 被引 1
Enhancing fatigue life of low-carbon ultra-high strength steel by inducing multi-component precipitates
Yang X C, Ju Y Z, Li C N, Gao C, Ba L Z, Wu S P, Wang C, Ding T H, Wang Y, Di X J*
International Journal of Plasticity, 2025, 187: 104287
2025 SCI Q1 IF 12.8 被引 8
Effect of Welding Thermal Cycles on Microstructure Transformation and Hardening Behaviour of HAZ for 1.0 GPa-grade Ultra-high Strength Seamless Steel Tube
Han J Y, Li C N, Yang X C, Yang Y K, Wang Y, Zhao Y Q, Di X J*
Journal of Materials Engineering and Performance, 2025
2025 SCI Q3 IF 2
Unveiling the abnormal grain growth behavior in diffusion-bonded joints of zirconium alloys enhanced by gradient nanostructures
Yang X, Wang Z M, Wang Y X, Niu S Y*, Qiu Q W, Li H J, Wang Y*, Yang Z W
Materials Science & Engineering A, 2025, 943: 148772
2025 SCI Q1 IF 7
Effect of nano-precipitates and TRIP effect on strain hardening behavior of low-carbon nanostructured steel
Yang X C, Li C N, Ba L Z, Wang C, Ju Y Z, Wang Y, Di X J*
Construction and Building Materials, 2025, 472: 140816
2025 SCI Q1 IF 8 被引 1
A direct brazing approach to low-warpage, high-thermal-efficiency Cu/Si3N4/Cu substrates for power electronics
Ying Wang*, Ziyu Liu, Miaomiao Fang, Ying Han, Shiyu Niu, Zhenwen Yang
China Welding, 2025
2025
Effect of Hydrogenation on the Microstructure and Mechanical Properties of Low-Temperature Diffusion Bonding Joints of Zirconium Alloy
Zeming Wang, Xu Yang, Ruiping Wang, Zonglin Xiao, Fugong Qi, Shiyu Niu, Zhenwen Yang, Ying Wang*
Advanced Engineering Materials, 2025, 28(3)
2025 SCI Q2 IF 3.3 唯一通讯
Heterogeneous nucleation mechanism of M7C3 carbides in Fe-Cr-C-V-xTi hardfacing alloys
Taihao Ding, Xinjie Di, Ying Wang, Fengqin Ji, Defa Xin, Longjiang Gao, Chengning Li
Materials Science and Engineering: A, 2025, 949: 149337
2025 SCI Q1 IF 7
Study on the Microstructure and Properties of Additive Manufacturing Al-Mg-Sc Alloy with CMT-PADV plus Arc Weaving Process
Hongfei Xu, Lijun Yang, Yiming Huang, Ying Wang
Journal of Materials Engineering and Performance, 2025, 30(2): 1448-1459
2025 SCI Q3 IF 2 被引 1
Effect of Welding Thermal Cycles on Microstructure Transformation and Hardening Behaviour of HAZ for 1.0GPa-grade Ultra-high Strength Seamless Steel Tube
Junya Han, Chengning Li, Xiaocong Yang, Yuke Yang, Ying Wang, Yanqing Zhao, Xinjie Di
Journal of Materials Engineering and Performance, 2025, 34(22): 26442-26454
2025 SCI Q3 IF 2
采用AlSiMgCu钎料液相辅助扩散连接6063铝合金接头组织与力学性能分析
胡若琪, 张俊杰, 王颖, 张冬雪, 木瑞洁, 杨振文*
焊接学报, 2025, 46(6): 11-19
2025 EI
钎焊温度对SiC陶瓷低温接头组织和性能的影响
杨振文, 吴钰洁, 雍臻, 王颖*
天津大学学报(自然科学与工程技术版), 2025, 58(5): 510-519
2025 EI 唯一通讯
Ni中间层厚度对Zr-4/Nb/Ni/316SS扩散连接接头微观组织和性能的影响
李茜茹，张帆，牛士玉，王颖*，杨振文
稀有金属材料与工程, 2025, 54(12): 3105-3112
2025 SCI Q4 IF 0.9 唯一通讯
ZTA复相陶瓷/GH3536镍基合金钎焊接头组织演变和力学性能
王颖*，张子毅，牛士玉，杨振文
稀有金属材料与工程, 2025, 54(8): 2008-2016
2025 SCI Q4 IF 0.9 一作&通讯 被引 1
Al2O3陶瓷与多体系金属一体化钎焊结构优化与封接可靠性
杨振文，张冬雪，邵跃，赵军，乔屹，王纪来，王颖
焊接学报, 2025, 46(9): 1-10
2025 EI
Si3N4/Cu AMB接头组织与性能研究
方苗苗, 杨振文, 牛士玉, 王颖*
焊接学报, 2025, 46(10): 24-32
2025 EI 唯一通讯
焊接振幅对铜端子-铝线束超声波焊接接头界面组织和性能的影响
李东隽, 王颖, 雍臻, 杨坦, 杜辉, 杨振文
焊接学报, 2025, 46(9): 37-45
2025 EI 唯一通讯
超声冲击制备梯度纳米结构Zr-4合金低温扩散连接界面组织与力学性能
杨旭; 杨振文*; 王颖; 李会军; 李永兵
金属学报, 2025, 62(1): 159-172
2025 SCI Q2 IF 2.2
热处理对锆合金扩散焊接头第二相及性能的影响
王泽明, 陈晨, 王瑞萍, 肖宗林, 牛士玉, 王颖*, 杨振文
中国有色金属学报, 2025, 35(10): 3418-3429
2025 EI 唯一通讯
In situ nanometer-resolution strain and orientation mapping for gas-solid reactions via precession-assisted four-dimensional scanning transmission electron microscopy
Y Sun, Ying Han*, D Zhou, AS Galanis, A Gomez-Perez, K Wang
Nano Today, 2025
2025 SCI Q1 IF 18.9 被引 4
Strain Engineering of Twisted Bilayer Graphene: The Rise of Strain-Twistronics
Y Hou, J Zhou, M Xue, M Yu, Ying Han, Z Zhang, Y Lu
Small, 2025
2025 SCI Q1 IF 13.0 被引 62
Electric field-confined synthesis of single atomic TiOxCy electrocatalytic membranes
Y Gao, S Liang, C Jiang, M Gu, Q Zhang, A Abdelhafiz, Z Zhang, Ying Han
Science Advances, 2025
2025 SCI Q1 IF 13.0 被引 23
High-performance p-type field-effect transistors using substitutional doping and thickness control of two-dimensional materials
M Das, D Sen, NU Sakib, H Ravichandran, Y Sun, Z Zhang, S Ghosh, Ying Han
Nature Electronics, 2025
2025 SCI Q1 IF 34.0 被引 96
Joint microstructure and performance of brazing Si3N4-MoSi2 composites to Nb with AgCuTi and AgCuTi+MoSi2p active fillers
Fang Miaomiao, Wang Ying*, Shan Wenyu, Yang Zhenwen
Advanced Engineering Materials, 2024, 26(21): 2400893
2024 SCI Q2 IF 3.3 唯一通讯
Microstructure and mechanical properties of Al2O3 ceramic and copper joints brazed with AgCuInTi brazing alloy
Botao Li, Ben Liu, Yong Wang, Ruoqi Hu, Ying Wang*, Zhenwen Yang
International Journal of Applied Ceramic Technology, 2024, 21(6): 4228-4240
2024 SCI Q2 IF 2.3 唯一通讯 被引 4
Enhanced properties in Si3N4/Cu AMB joints through regulating interfacial reaction modes induced by Mo-particle additives
Zhenwen Yang, Miaomiao Fang, Zhen Yong, Qi Wen, Shiyu Niu, Ying Wang*
Ceramics International, 2024, 50(21): 43969-43978
2024 SCI Q1 IF 5.6 唯一通讯 被引 6
Formation mechanisms and mechanical properties in aluminum cables and copper terminals ultrasonic welded joint
Ying Wang, Dongjun Li, Zhen Yong, Xu Yang, Shiyu Niu, Hui Du, Zhenwen Yang*
Materials Today Communications, 2024, 39: 106029
2024 SCI Q2 IF 4.5 被引 4
Tailoring the microstructure and mechanical properties of wire arc additively manufactured Ti6Al4V alloy by in-situ microalloying with modified nanocarbon
Z.W. Yang, C.L. Shi, X.Z. Yao, H.J. Li, Z.Q. Ma, Y. Wang*
Materials Characterization, 2024, 218: 114510
2024 SCI Q1 IF 5.5 唯一通讯 被引 7
Microstructural evolution and mechanical properties of Zr-4 alloy joints diffusion bonded with Nb interlayer
Xu Yang, Chengxiang Guo, RuiPing Wang, Lei Xu, Ying Wang, HuiJun Li, ZhenWen Yang*
Materials Characterization, 2024, 208: 113596
2024 SCI Q1 IF 5.5 被引 15
Varying interfacial reaction patterns in (VNbTaMoW)C ceramic joints brazed with Ti-Zr-Ni-Cu filler alloy
Shiyu Niu, Zhenwen Yang, Ruijie Mu, Kongbo Sun, Ying Wang*
Journal of the European Ceramic Society, 2024, 44: 5541-5554
2024 SCI Q1 IF 6.2 唯一通讯 被引 8
Enhanced interfacial structure of (HfZrTiTaNb)C high-entropy ceramic joint brazed using FeCoCrNiTi0.2 alloy filler
Ruijie Mu, Ying Wang, Shiyu Niu, Kongbo Sun, Zhenwen Yang*
Journal of Materials Processing Technology, 2024, 324: 118253
2024 SCI Q1 IF 7.5 被引 11
Design of a double-layer composite ceramic and its brazing with niobium
Xiaoyu Zheng, Ying Wang*, Zhenwen Yang.
Ceramics International, 2024, 50(3): 5250-5260
2024 SCI Q1 IF 5.6
Different interfacial reaction modes between ZrO2 and active metals: Insights from interfacial reaction experiments and molecular dynamic simulation
Qi F. G.*, Yang Z. W., Wang Y., Ding H. M., Liu Q.
Ceramics International, 2024, 50(9): 14326-14339
2024 SCI Q1 IF 5.6 被引 1
Recent progress on additive manufacturing of steel-based functionally graded materials
Ju Y Z, Li C N, Yang X C, Ba L Z, Wang Y, Di X J*
Materials Today Communications, 2024, 40: 109953
2024 SCI Q2 IF 4.5 被引 12
高熵碳化物陶瓷及其钎焊接头的组织和力学性能
王颖，木瑞洁，牛士玉，孙孔波，杨振文*
机械工程学报, 2024, 60(22): 76-85
2024 EI
热输入对脉冲TIG电弧增材制造Ti6Al4V钛合金微观组织与力学性能的影响
高震，王颖，杨蔚然，杨振文*，李会军
中国有色金属学报, 2024, 34(10): 3366-3381
2024 EI 被引 4
采用Nb中间层扩散连接Zr-4合金接头界面组织与性能
王瑞萍，肖宗林，杨旭，王泽明，王颖*，杨振文
焊接学报, 2024, 45(8): 33-40
2024 EI 唯一通讯 被引 4
微量TiC粉末合金化改善电弧增材制造Ti-6Al-4V合金的组织性能
姚兴中，李会军，杨振文，王颖*
焊接学报, 2024, 45(6): 12-19
2024 EI 唯一通讯 被引 5
基于三探针检测的TC4钛合金激光深熔焊等离子体动态行为研究
张涵博, 杨立军, 田付云, 黄一鸣*, 王颖
焊接学报, 2024, 45(11): 101-109
2024 EI 被引 1
原位合金化调控电弧增材制造钛合金组织与性能研究进展
张萌, 王颖, 马宗青, 杨振文*
特种铸造及有色合金, 2024, 44(11): 1478-1488
2024 被引 2
Integrated rocksalt-polyanion cathodes with excess lithium and stabilized cycling
Y Huang, Y Dong, Y Yang, T Liu, M Yoon, S Li, B Wang, EY Zheng, Ying Han
Nature Energy, 2024
2024 SCI Q1 IF 60.0 被引 59
Grain rotation mechanisms in nanocrystalline materials: Multiscale observations in Pt thin films
Y Tian, X Gong, M Xu, C Qiu, Ying Han, Y Bi, LV Estrada, E Boltynjuk
Science, 2024
2024 SCI Q1 IF 44.0 被引 53
Grain boundaries are Brownian ratchets
C Qiu, M Punke, Y Tian, Ying Han, S Wang, Y Su, M Salvalaglio, X Pan
Science, 2024
2024 SCI Q1 IF 44.0 被引 42
Ubiquitous short-range order in multi-principal element alloys
Ying Han*, H Chen, Y Sun, J Liu, S Wei, B Xie, Z Zhang, Y Zhu, M Li, J Yang
Nature Communications, 2024
2024 SCI Q1 IF 14.7 被引 106
In-situ 4D-STEM Study of Chemo-Mechanical Interactions during Metal Oxidation
Y Sun, Ying Han*, D Zhou, HP Garza, AG Perez, T Galanis, S Nicolopoulos
Microscopy and Microanalysis, 2024
2024 SCI Q2 IF 3.0 被引 2
Direct measurement of tensile mechanical properties of few-layer hexagonal boron nitride (h-BN)
J Zhou, M Zhu, Ying Han, X Zhou, S Wang, J Chen, H Wu, Y Hou, Y Lu
Journal of Applied Physics, 2024
2024 SCI Q2 IF 3.0 被引 8
Direct extraction of lithium from ores by electrochemical leaching
H Zhang, Ying Han, J Lai, J Wolf, Z Lei, Y Yang, F Shi
Nature Communications, 2024
2024 SCI Q1 IF 14.7 被引 71
Effect of growth temperature on the microstructure and properties of epitaxial MoS2 monolayers grown by metalorganic chemical vapor deposition
C Chen, N Trainor, S Kumari, H Myja, T Kammell, Z Zhang, Y Zhang, Ying Han
Journal of Vacuum Science & Technology A, 2024
2024 SCI Q3 IF 2.5 被引 29
Three-dimensional integration of two-dimensional field-effect transistors
D Jayachandran, R Pendurthi, MUK Sadaf, NU Sakib, A Pannone, Ying Han
Nature, 2024
2024 SCI Q1 IF 50.0 被引 328
Interfacial microstructure and mechanical properties of joints between ZrO2 ceramic and 316 stainless steel brazed using Ag-Cu-In-Ti filler
Miaomiao Fang, Ben Liu, Yong Wang, Zhenwen Yang，Ying Wang*
Vacuum, 2023, 218: 112668
2023 SCI Q2 IF 3.9 唯一通讯 被引 11
Wetting of FeCoCrNiTi0.2 high entropy alloy on the (HfZrTiTaNb)C high entropy ceramic
Ruijie Mu, Ying Wang, Shiyu Niu, Kongbo Sun, Zhenwen Yang*
Journal of the European Ceramic Society, 2023, 43(16): 7263-7272
2023 SCI Q1 IF 6.2 被引 12
Facile preparation of multiscale high-entropy carbide particles utilizing pulse discharge: Phase and microstructure evolution
Shiyu Niu, Kongbo Sun, Ruijie Mu, Ying Wang, Zhenwen Yang*
Advanced Engineering Materials, 2023, 25: 2300236
2023 SCI Q2 IF 3.3 被引 1
Investigating the influence of Al contents on microstructure and mechanical properties of Ni3Al superalloy Afabricated by twin wire-based direct arc energy deposition
Meng Zhang, Zhenwen Yang, Zongqing Ma, Zhijiang Wang, Ying Wang*
Advanced Engineering Materials, 2023, 25(23): 2301274
2023 SCI Q2 IF 3.3 唯一通讯 被引 1
Investigation of vacuum active brazing of (HfZrTiTaNb)C high-entropy carbide ceramic to Nb with TiZrCuNi filler alloy
Kongbo Sun, Zhenwen Yang, Ruijie Mu, Shiyu Niu, Ying Wang*
Vacuum, 2023, 215: 112362
2023 SCI Q2 IF 3.9 唯一通讯 被引 8
Microstructure evolution and mechanical properties of the TiB2-TiC-SiC composite ceramic and Nb brazed joint
Y. Wang, X.Y. Zheng, Y.R. Wei, Z.W. Yang
Journal of Manufacturing Processes, 2023(92): 179-188
2023 SCI Q1 IF 6.8 被引 15
Microstructure and Mechanical Properties of Zr-4 Alloy and 316 Stainless Steel Diffusion Bonding Joint Using Nb/Ni Composite Interlayer
Zhenwen Yang, Fan Zhang, Xu Yang, Ying Wang*, Dongpo Wang
Advanced Engineering Materials, 2023: 2300279
2023 SCI Q2 IF 3.3 唯一通讯 被引 12
Interfacial structure and mechanical properties of ZrO2 ceramic and GH4169 alloy joint brazed with Ag-TiH2 composite filler
Ying Wang, Yaru Wei, Xiaoyu Zheng, Zhenwen Yang*
Materials Characterization, 2023(197): 112696
2023 SCI Q1 IF 5.5 被引 11
Microstructural evolution and high-temperature oxidation resistance of YSZ/Crofer 22H brazed joints using Ag-based filler for solid-oxide fuel cell applications
Z.W. Yang, Z. Xiong, J.L., Wang, Y., Wang, D.P. Wang
Materials Characterization, 2023(200): 112888
2023 SCI Q1 IF 5.5 被引 6
Strengthening the functionally graded material of stainless steel 308L and Inconel 625 by local Nb alloying
Li T X, Wang Z J*, Yang Z W, Wang Y
Materials Letters, 2023, 331: 133499
2023 SCI Q3 IF 2.7 被引 18
Effect of Different Wire Feeding Strategies on the Preparation of Functionally Graded Materials by Dual-Wire Arc Additive Manufacturing
Li T X, Wang Z J*, Yang Z W, Wang Y, Hu S S
Metallurgical and Materials Transactions B, 2023, 54: 43-49
2023 SCI Q2 IF 3.1 被引 6
Active brazing of (HfTaZrNbTi)C high-entropy carbide ceramic and Nb with Ti–Ni composite interlayer: Novel findings on the reaction layer
K.B. Sun, Z.W. Yang*, R.J. Mu, S.Y. Niu, Y. Wang
Materials Characterization, 2023(203): 113103
2023 SCI Q1 IF 5.5 被引 9
基于位错模型的增材制造构件疲劳裂纹萌生行为
赵洋洋, 林可欣, 王颖*, 龚宝明
焊接学报, 2023, 44(7): 1-8
2023 EI 唯一通讯 被引 7
316L不锈钢扩散焊接头组织性能分析
胡若琪, 纪康康, 王颖, 王东坡, 杨振文*
焊接学报, 2023, 44(5): 1-6
2023 EI 被引 9
SLM成形17-4PH不锈钢微观组织与动态断裂性能
陈彦兴, 刘秀国, 赵洋洋, 龚宝明*, 王颖, 利成宁
焊接学报, 2023, 44(2): 1-9
2023 EI 被引 5
TC11钛合金扩散连接接头组织及力学性能研究
高云鹏, 王颖, 王东坡, 杨振文*
稀有金属材料与工程, 2023, 52(2): 770-776
2023 SCI Q4 IF 0.9 被引 8
热等静压处理对选区激光熔化GH3536微观结构及拉伸性能的影响
林可欣, 刘秀国, 龚宝明*, 王颖
中国激光, 2023, 50(4): 402005
2023 EI 被引 7
In Situ TEM Characterization and Modulation for Phase Engineering of Nanomaterials
Ying Han*, L Wang, K Cao, J Zhou, Y Zhu, Y Hou, Y Lu
Chemical Reviews, 2023
2023 SCI Q1 IF 62.0 被引 80
Toward high-performance p-type two-dimensional field effect transistors: contact engineering, scaling, and doping
A Oberoi, Ying Han, SP Stepanoff, A Pannone, Y Sun
ACS Nano, 2023
2023 SCI Q1 IF 17.0 被引 78
Electrical Discharge Induced Bulk-to-Nanoparticle Transformation: Nano High-Entropy Carbide as Catalysts for Hydrogen Evolution Reaction
Shiyu Niu, Zhenwen Yang, * Fugong Qi, Ying Han, Zizheng Shi, Qiwen Qiu, Xiaopeng Han*, Ying Wang, Xiwen Du
Advanced Functional Materials, 2022(32): 2203787
2022 SCI Q1 IF 19 被引 55
Blackening mechanism and mechanical properties variation of zirconia ceramic induced by active metal brazing
Fugong Qi, Na Wang, Zhenwen Yang*, Ying Wang, Huijun Li
Advanced Engineering Materials, 2022: 2200105
2022 SCI Q2 IF 3.3 被引 9
Defective TiO2 with increased photocatalytic activity synthesized by the TiO2/Ti interfacial reaction method
Fugong Qi, Zhenwen Yang*, Qiwen Qiu, Ying Wang, Huijun Li
Surfaces and Interfaces, 2022(30): 101828
2022 SCI Q1 IF 6.3 被引 11
Microstructure and mechanical properties of twin wire and arc additive manufactured Ni3Al-based alloy
Meng Zhang, Ying Wang, Zhenwen Yang*, Zongqing Ma, Zhijiang Wang, Dongpo Wang
Journal of Materials Processing Technology, 2022(303): 117529
2022 SCI Q1 IF 7.5 被引 28
Non-uniform high-temperature oxidation behavior of twin wire and arc additive manufactured Ni3Al-based alloy
Meng Zhang, Ying Wang, Zongqing Ma, Zhijiang Wang, Zhenwen Yang*
Journal of Manufacturing Processes, 2022(84): 522-530
2022 SCI Q1 IF 6.8 被引 9
Hot cracking during the fabrication of Inconel 625/stainless steel 308 L functionally graded material by dual-wire arc additive manufacturing
Li T X, Wang Z J*, Hu S S, Yang Z W, Wang Y
Journal of Manufacturing Processes, 2022, 82: 461-473
2022 SCI Q1 IF 6.8 被引 48
High-temperature stability of microstructure and mechanical properties of eutectic-reinforced high-entropy ceramic joint
Kongbo Sun, Zhenwen Yang*, Ruijie Mu, Shiyu Niu, Ying Wang, Dongpo Wang
Journal of the European Ceramic Society, 2022(42): 4436-4445
2022 SCI Q1 IF 6.2 被引 14
Microstructure and mechanical properties of the C/C composite and Nb joints brazed with an active Ag-based filler metal
Zheng K, Yang Z W, Wang Y*, Wang D P
Ceramics International, 2022, 48(7): 9612-9630
2022 SCI Q1 IF 5.6 被引 27
Fabrication and characterization of stainless steel 308 L/Inconel 625 functionally graded material with continuous change in composition by dual-wire arc additive manufacturing
Li T X, Wang Z J*, Yang Z W, Shu X X, Xu J, Wang Y, Hu S S
Journal of Alloys and Compounds, 2022, 915: 165398
2022 SCI Q1 IF 6.3 被引 51
Wetting and interfacial reaction of liquid CuAg-Ti alloy on SiO2-BN ceramic
Niu S Y, Yang Z W*, Wang Y, Wang D P
Applied Surface Science, 2022, 576: 151878
2022 SCI Q1 IF 6.9 被引 10
Joining of titanium diboride-based ultra high-temperature ceramics to refractory metal tantalum using diffusion bonding technology
Cai X Q, Wang D P, Qi F G, Wang Y*, Qiu Q W, Yang Z W
Journal of the European Ceramic Society, 2022, 42(2): 344-353
2022 SCI Q1 IF 6.2 被引 22
Enhancing the Tensile Properties of Inconel 625/TC4 Functionally Graded Materials Prepared by Dual-Wire Arc Additive Manufacturing via Compositional Gradient
Yangyang Zhao, Baoming Gong, Ying Wang*, Yunlong Gu
, 2022, 858: 144133
2022 SCI Q1 IF 6.4 被引 31
TiZrNiCu钎焊Si3N4-MoSi2复合陶瓷与Nb接头组织与力学性能
单文禹, 王颖, 杨振文*, 王东坡
稀有金属材料与工程, 2022, 51(3): 927-933
2022 SCI Q4 IF 0.9 被引 3
TiB2-TiC-SiC复合陶瓷接触反应钎焊接头界面组织及力学性能
蔡小强, 王东坡, 王颖, 杨振文*
航空学报, 2022, 43(2): 625006
2022 EI 被引 5
Al2O3陶瓷与GH3536真空钎焊接头界面组织与力学性能
杨斯媛, 王颖*, 王纪来, 杨振文, 王东坡
航空学报, 2022, 43(4): 525806
2022 EI 唯一通讯 被引 7
Experimentally measuring weak fracture toughness anisotropy in graphene
S Feng, K Cao, Y Gao, Ying Han, Z Liu, Y Lu, Z Xu
Communications Materials, 2022
2022 SCI Q1 IF 8.0 被引 29
Deep elastic strain engineering of 2D materials and their twisted bilayers
Ying Han*, L Gao, J Zhou, Y Hou, Y Jia, K Cao, K Duan, Y Lu
ACS Applied Materials & Interfaces, 2022
2022 SCI Q1 IF 9.5 被引 51
An effective approach for bonding of TZM and Nb-Zr system: Microstructure evolution, mechanical properties, and bonding mechanism
Z.W. Yang; J.M. Lin; J.F. Zhang; Q.W. Qiu*; Y. Wang*; DP Wang; J. Song
Journal of Materials Science & Technology, 2021, 84(0): 16-26
2021 SCI Q1 IF 14.3 被引 12
Interfacial characterization and mechanical properties of reactive air brazed ZrO2 ceramic joints with Ag-CuO-Al2TiO5 composite filler metal
Z.M. Wang; J.H. Yang; F.G. Qi; A.L. Hou; Z.W. Yang*; Y. Wang; D.P. Wang
Ceramics International, 2021, 47(20): 29128-29138
2021 SCI Q1 IF 5.6 被引 20
Balance of strength and plasticity of additive manufactured Ti-6Al-4V alloy by forming TiB whiskers with cyclic gradient distribution
Yang Z W*; Fu L Q; Wang S L; Zhang M; Wang Y*; Ma Z Q; Wang D P
Additive manufacturing, 2021, 39(0): 101883
2021 SCI Q1 IF 11.1 被引 80
Joining TiB2–TiC–SiC composite to Ta with a Ti/Ni/Ti interlayer: Interfacial microstructure and mechanical properties
Xiaoqiang Cai; Dongpo Wang; Ying Wang*; Zhenwen Yang
Journal of Manufacturing Processes, 2021, 64(0): 1349-1358
2021 SCI Q1 IF 6.8 唯一通讯 被引 20
Densification and joining of a (HfTaZrNbTi)C high-entropy ceramic by hot pressing
Sun KB; Yang ZW*; Mu RJ; Niu SY ; Wang Y ; Wang DP
Journal of the European Ceramic Society, 2021, 41(6): 3196-3206
2021 SCI Q1 IF 6.2 被引 75
Wetting and interfacial reaction of liquid CuAg-Ti alloy on SiO2-BN ceramic
Shiyu Niu, Zhenwen Yang*, Ying Wang, Dongpo Wang
Applied Surface Science, 2021(576): 151878
2021 SCI Q1 IF 6.9 被引 10
Diffusion bonding of (Hf0.2Zr0.2Ti0.2Ta0.2Nb0.2)C high-entropy ceramic with metallic Ni foil
R.J. Mu, Z.W. Yang*, S.Y. Niu, K.B. Sun, Y. Wang, D.P. Wang
Journal of the European Ceramic Society, 2021(41): 7478-7487
2021 SCI Q1 IF 6.2 被引 26
Oxidation difference of microstructural bands in additive manufactured titanium alloy
L.Q. Fu, Z.W. Yang*, Y. Wang, Z.Q. Ma, Z.J. Wang, D.P. Wang
Materials Research Letters, 2021, 10(1): 45090
2021 SCI Q1 IF 7.9 被引 8
Microstructural stability and mechanical properties of Al2O3/Kovar 4J34 joint vacuum brazed using Ag-5Cu-1Al-1.25Ti (wt%) filler metal
J.L. Wang, Z.W. Yang*, Y. Wang, D.P. Wang, H.J. Li
Journal of Manufacturing Processes, 2021(72): 553–564
2021 SCI Q1 IF 6.8 被引 18
Defects in black zirconia responsible for solar energy harvesting
Fugong Qi, Zhenwen Yang*, Ying Wang, Qiwen Qiu, Huijun Li
Journal of Materials Chemistry C, 2021(9): 16732-16740
2021 SCI Q1 IF 5.1 被引 14
Microstructure and Mechanical Properties of Vacuum Diffusion Bonded Zr-4 Alloy Joint
Wang Z M, Yang X, Wang J, Xiao Z L, Qi F G, Sun K B, Wang Y, Yang Z W
Crystals, 2021, 11(11): 1437
2021 SCI Q2 IF 2.4 被引 22
Interfacial microstructure and mechanical properties of Ti3SiC2 ceramic and TC11 alloy joint diffusion bonded with a Cu interlayer
Niu S Y, Wu X F, Yang Z W*, Wang Y, Wang D P
Ceramics International, 2021, 47(1): 130-137
2021 SCI Q1 IF 5.6 被引 15
Engineering Dual Active Sites at the Interface between Nanoporous Pt and Nanosized CeO2 to Enhance Photo-Thermocatalytic CO Oxidation
Fugong Qi, Jinfeng Zhang, Lizhu Song, Shiyu Niu, Zhenwen Yang*, Ying Wang, Qiwen Qiu
Advanced Materials Interfaces, 2021, 8(14): 2100581
2021 SCI Q2 IF 4.4 被引 10
空气反应钎焊ZrO2与GH3536接头组织与力学性能
杨钧皓，杨振文*，王颖，宋奎晶，王东坡
稀有金属材料与工程, 2021, 50(12): 4450-4456
2021 SCI Q4 IF 0.9 被引 1
Nb合金化对电弧增材制造NiTi基形状记忆合金的影响
许博, 王颖*, 张萌, 杨振文, 王东坡
焊接学报, 2021, 42(8): 1-7
2021 EI 唯一通讯 被引 7
TiB2-TiC-SiC复合陶瓷接触反应钎焊接头界面组织及力学性能
蔡小强, 王东坡, 王颖, 杨振文*
航空学报, 2021, 43(2): 625006
2021 EI 被引 5
Al2O3陶瓷与GH3536真空钎焊接头界面组织与力学性能
杨斯媛, 王颖*, 王纪来, 杨振文, 王东坡
航空学报, 2021, 43(4): 525806
2021 EI 被引 7
新工科背景下焊接学科的《材料测试分析方法》课程改革与实践——以天津大学材料成型及控制工程专业为例
杨振文*, 韩雅静, 王颖, 杨立军, 王东坡
天津大学学报(社会科学版), 2021, 23(5): 385-389
2021 被引 13
Multifunctional macroassembled graphene nanofilms with high crystallinity
L Peng, Ying Han, M Wang, X Cao, J Gao
Advanced Materials, 2021
2021 SCI Q1 IF 27.0 被引 58
Magnetically induced micropillar arrays for an ultrasensitive flexible sensor with a wireless recharging system
L Gao, Ying Han, JU Surjadi, K Cao, W Zhou
Science China Materials, 2021
2021 SCI Q1 IF 9.0 被引 31
Experimental nanomechanics of 2D materials for strain engineering
Ying Han*, J Zhou, H Wang, L Gao, S Feng, K Cao, Z Xu, Y Lu
Applied Nanoscience, 2021
2021 SCI Q2 IF 4.0 被引 32
Diffusion bonding of Ni3Al-based alloy using a Ni interlayer
Z.W. Yang; J. Lian; J. Wang; X.Q. Cai; Y. Wang*; D.P. Wang; Z.M. Wang; Y.C. Liu
Journal of Alloys and Compounds, 2020, 819(153324): 1-11
2020 SCI Q1 IF 6.2 唯一通讯 被引 45
Phase transition, microstructural evolution and mechanical properties of Ti–6Al–4V and Ti–6.5Al–3.5Mo–1.5Zr–0.3Si joints brazed with Ti–Zr–Ni–Cu filler metal
Z.W. Yang*; Y.H. Chen; S.Y. Niu; Y. Wang; Y.J. Han;· X.Q. Cai; D.P. Wang
Archives of Civil and Mechanical Engineering, 2020, 20(3): 88
2020 SCI Q1 IF 4.4 被引 8
Fabrication of multi-element alloys by twin wire arc additive manufacturing combined with in-situ alloying
Z.W. Yang* ; Q. Liu; Y. Wang; Z.Q. Ma; Y.C. Liu
Materials Research Letters, 2020, 8(12): 477-482
2020 SCI Q1 IF 7.9 被引 48
Interfacial microstructure evolution and mechanical properties of Ni3Al-based alloy TLP joints with BNi-2 interlayer
Z.W. Yang *; K.B. Sun ; J. Lian ; X.Q. Cai ; Y. Wang ; D.P. Wang ; Y.C. Liu
Intermetallics, 2020, 125(106885): 1-10
2020 SCI Q1 IF 4.8 被引 15
Microstructural evolution and mechanical properties of FeNi42 alloy and SiC ceramic joint vacuum brazed with Ag-based filler metals
Z.T. Hao; D.P. Wang; Z.W. Yang*; Y. Wang
Ceramics International, 2020, 46(8): 12795-12805
2020 SCI Q1 IF 5.6 被引 21
Microstructure and mechanical properties of contact-reactive brazed TZM/Nb-Zr joints with Ni interlayer
Yang Z W; Sun K B; Lin J M ; Wang Y*; Wang D P
Journal of Manufacturing Processes, 2020, 57(0): 817-827
2020 SCI Q1 IF 6.8 唯一通讯 被引 7
Microstructure and mechanical properties of 17-4 PH stainless steel and Al2O3 ceramic joints brazed with graphene reinforced Ag-Cu-Ti brazing alloy
Yang Z W*; Yang J H; Han Y J*; Y. Wang; D P
Vacuum, 2020, 181(0): 109604
2020 SCI Q2 IF 3.9 被引 21
Improving the Bonding Strength of Nb–C/C Composite Brazed Structures by Preoxidation
S.Y. Niu; Z.W. Yang *; C.L. Wang; Y. Han; Y. Wang*; D.P. Wang
Advanced Engineering Materials, 2020, 22(7): 2000065
2020 SCI Q2 IF 3.3 被引 18
Interfacial Reaction-Induced Defect Engineering: Enhanced Visible and Near-Infrared Absorption of Wide Band Gap Metal Oxides with Abundant Oxygen Vacancies
Fugong Qi; Zhenwen Yang;* Jinfeng Zhang; Ying Wang; Qiwen Qiu; Huijun Li
ACS Applied Materials & Interfaces, 2020, 12(49): 55417-55425
2020 SCI Q1 IF 8.2 被引 33
C/C composite surface modified by electrophoretic depositing SiC nanowires and its brazing to Nb
C.K. Jin; Y. Wang; Z.W. Yang*; D.P. Wang
Ceramics International, 2020, 46(1): 204-211
2020 SCI Q1 IF 5.6 被引 41
原位合金化双丝电弧增材制造γ TiAl组织性能研究
刘齐, 张萌, 付乐琪, 杨振文*, 王颖, 王东坡
稀有金属材料与工程, 2020, 49(11): 3919-3924
2020 被引 8
Large elastic deformation and defect tolerance of hexagonal boron nitride monolayers
Ying Han*, S Feng, K Cao, Y Wang, L Gao, Z Xu, Y Lu
Cell Reports Physical Science, 2020
2020 SCI Q1 IF 10.0 被引 54
In situ mechanical characterization of silver nanowire/graphene hybrids films for flexible electronics
K Cao, H Yang, L Gao, Ying Han, J Feng
International Journal of Smart and Nano Materials, 2020
2020 SCI Q2 IF 5.0 被引 17
High-efficiency cellular reprogramming by nanoscale puncturing
Y Wang, Z Wang, K Xie, X Zhao, X Jiang, B Chen, Ying Han, Y Lu, L Huang
Nano Letters, 2020
2020 SCI Q1 IF 10.0 被引 30
Thermal effect and Rayleigh instability of ultrathin 4H hexagonal gold nanoribbons
P Li, Ying Han, X Zhou, Z Fan, S Xu, K Cao
Matter, 2020
2020 SCI Q1 IF 17.0 被引 46
Elastic straining of free-standing monolayer graphene
K Cao, S Feng, Ying Han, L Gao, T Hue Ly, Z Xu, Y Lu
Nature Communications, 2020
2020 SCI Q1 IF 14.7 被引 503
Microstructure and mechanical properties of Ti2AlNb alloy and C/C composite joints brazed with Ag-Cu-Zn and Ag-Cu-Zn/Cu/Ag-Cu-Ti filler metals
Zhitao Hao; Dongpo Wang; Zhenwen Yang *; Ying Wang
Archives of Civil and Mechanical Engineering, 2019, 19(4): 1083-1094
2019 SCI Q1 IF 4.4 被引 27
Microstructure and mechanical properties of Ni3Al-based alloy joint transient liquid phase bonded using Ni/Ti interlayer
Z.W. Yang; J. Lian; X.Q. Cai; Y. Wang*; D.P. Wang; Y.C. Liu
Intermetallics, 2019, 109(0): 179-188
2019 SCI Q1 IF 4.8 唯一通讯 被引 22
Design of reinforced interfacial structure in brazed joints of C/C composites and Nb by pre-oxidation surface treatment combined with in situ growth of CNTs
Z.W. Yang*; C.L. Wang; Y. Han; Y.T. Zhao; Y. Wang*; D.P. Wang
Carbon, 2019, 143(0): 494-506
2019 SCI Q1 IF 11.6 被引 84
Effect of ultrasonic impact treatment on the microstructure and mechanical properties of diffusion-bonded TC11 alloy joints
Z. W. Yang; Q. Liu; J. H. Wang; Z. Q. Ma; Y. Wang*; D. P. Wang
Archives of Civil and Mechanical Engineering, 2019, 19(4): 1431-1441
2019 SCI Q1 IF 4.4 唯一通讯 被引 13
Relief of residual stress in Al2O3/Nb joints brazed with Ag-Cu-Ti/Cu/Ag-Cu-Ti composite interlayer
Y.T. Zhao; Y. Wang; Z.W. Yang*; D.P. Wang
Archives of Civil and Mechanical Engineering, 2019, 19(1): 1-10
2019 SCI Q1 IF 4.4 被引 55
Interfacial microstructure and mechanical properties of TC4/Ti3SiC2 contact-reactive brazed joints using a Cu interlayer
Y. Wang; Y. H. Xia; Z.W. Yang*; D. P. Wang
Ceramics International, 2019, 44(18): 22154-22164
2019 SCI Q1 IF 5.6 被引 23
Microstructure and mechanical properties of Ti3SiC2/Ti3SiC2 diffusion bonded joints using Ti foil as an interlayer
Y. Wang; X.F. Wu; Z.W. Yang*; Y.H. Xia; D.P. Wang
Ceramics International, 2019, 45(16): 20900-20909
2019 SCI Q1 IF 5.6 被引 19
Effects of Cu interlayers on the microstructure and mechanical properties of Al2O3/AgCuTi/Kovar brazed joints
Y. Wang; C.K. Jin; Z.W. Yang*; D.P. Wang
International Journal of Applied Ceramic Technology, 2019, 16(3): 896-906
2019 SCI Q2 IF 2.3 被引 24
Microstructure and Mechanical Properties of Titanium–Zirconium–Molybdenum and Ti2AlNb Joint Diffusion Bonded with and without a Ni Interlayer
J. B. Niu; Y. Wang; Z.W. Yang*; D.P. Wang
Advanced Engineering Materials, 2019, 21(11): 1900713
2019 SCI Q2 IF 3.3 被引 8
Ti3SiC2陶瓷与TC4合金钎焊接头微观组织及性能
王颖, 夏永红, 杨振文, 王东坡
稀有金属材料与工程, 2019, 48(9): 3041-3047
2019 被引 13
薄板对接超声疲劳试样设计方法及其误差分析
王颖, 王东坡, 丁吉坤, 邓彩艳*, 吴良晨
焊接学报, 2019, 40(1): 71-74
2019 被引 6
The combined effects of grain and sample sizes on the mechanical properties and fracture modes of gold microwires
HK Yang, K Cao, Ying Han, M Wen, JM Guo, ZL Tan, J Lu, Y Lu
Journal of Materials Science & Technology, 2019
2019 SCI Q1 IF 9.0 被引 19
Nanomechanics of low-dimensional materials for functional applications
S Fan, X Feng, Ying Han, Z Fan, Y Lu
Nanoscale Horizons, 2019
2019 SCI Q1 IF 9.7 被引 61
Contact-reactive brazing of Ti3SiC2 ceramic to TC4 alloy using a Ni interlayer: Interfacial microstructure and joining properties
Y.H. Xia; Y. Wang; Z.W. Yang*; D.P. Wang
Ceramics International, 2018, 44(10): 11869-11877
2018 SCI Q1 IF 5.6 被引 42
Interfacial microstructure and mechanical properties of TC4/Ti3SiC2 contact-reactive brazed joints using a Cu interlayer
Y. Wang; Y. H. Xia; Z.W. Yang*; D. P. Wang
Ceramics International, 2018, 44(18): 22154-2264
2018 SCI Q1 IF 5.6 被引 23
Microstructure, residual stress and mechanical properties of Al2O3/Nb joints vacuum-brazed with two Ag-based active fillers
Y. Wang; Y.T. Zhao; Z.W. Yang*; D.P. Wang
Vacuum, 2018, 158(0): 14-23
2018 SCI Q2 IF 3.9 被引 35
Diffusion bonding of Ti2AlNb alloy using pure Ti foil as an interlayer
Y. Wang; X.Q. Cai ; Z.W. Yang*; D.P. Wang; X.G. Liu; Y.C. Liu
Journal of Alloys and Compounds, 2018, 756(0): 163-174
2018 SCI Q1 IF 6.2 被引 28
Vacuum brazing of Ti2AlNb and TC4 alloys using Ti-Zr-Cu-Ni and Ti-Zr-Cu-Ni plus Mo filler metals: Microstructural evolution and mechanical properties
Y. Wang; M. Jiao; Z.W. Yang*; D.P. Wang; Y.C. Liu
Archives of Civil and Mechanical Engineering, 2018, 18(2): 546-556
2018 SCI Q1 IF 4.4 被引 37
An investigation on diffusion bonding of TZM alloy and Nb-Zr alloy using Ni foil as an interlayer
J.M. Lin; Z.W. Yang*; H.H. Wei; Y. Wang; Z.Q. Ma; D.P. Wang
Journal of Alloys and Compounds, 2018, 743(0): 780-788
2018 SCI Q1 IF 6.2 被引 27
The influence of post-production heat treatment on the multi-directional properties of nickel-aluminum bronze alloy fabricated using wire-arc additive manufacturing process
Shen C, Pan Z X*, Ding D H, Yuan L, Nie N, Wang Y, Luo D Z, Cuiuri D, Van Duin S, Li H J
Additive Manufacturing, 2018, 23: 411-421
2018 SCI Q1 IF 11.1 被引 114
Ti2AlNb合金瞬时液相扩散连接接头界面组织及性能分析
蔡小强, 王颖, 杨振文*, 王东坡
焊接学报, 2018, 39(2): 24-28
2018 EI 被引 8
TiNiB复合钎料钎焊Ti2AlNb基合金接头微观组织及性能
焦曼, 王颖, 杨振文*, 王东坡
稀有金属材料与工程, 2018, 47(1): 389-395
2018 EI 被引 7
Graphene-bridged multifunctional flexible fiber supercapacitor with high energy density
L Gao, J Song, JU Surjadi, K Cao, Ying Han, D Sun, X Tao, Y Lu
ACS Applied Materials & Interfaces, 2018
2018 SCI Q1 IF 9.5 被引 96
Size-dependent fracture behavior of silver nanowires
K Cao, Ying Han, H Zhang, L Gao, H Yang, J Chen, Y Li, Y Lu
Nanotechnology, 2018
2018 SCI Q2 IF 3.0 被引 29
Mechanically Assisted Self-Healing of Ultrathin Gold Nanowires
B Wang, Ying Han, S Xu, L Qiu, F Ding, J Lou, Y Lu
Small, 2018
2018 SCI Q1 IF 13.0 被引 34
Mechanically stable ternary heterogeneous electrodes for energy storage and conversion
L Gao, H Zhang, JU Surjadi, P Li, Ying Han, D Sun, Y Lu
Nanoscale, 2018
2018 SCI Q1 IF 6.0 被引 30
Characterization of microstructure and mechanical properties of Al2O3/TiAl joints vacuum-brazed with Ag-Cu-Ti plus W composite filler
Z.W.Yang; J.M. Lin; Y. Wang*; D.P. Wang
Vacuum, 2017, 143(0): 294-302
2017 SCI Q2 IF 3.9 唯一通讯 被引 51
Active metal brazing of SiO2-BN ceramic and Ti plate with Ag-Cu-Ti plus BN composite filler
Z.W.Yang*; C.L. Wang; Y. Wang; L.X. Zhang; D.P. Wang; J.C. Feng
Journal of Materials Science & Technology, 2017, 33(11): 1392-1401
2017 SCI Q1 IF 14.3 被引 36
Effects of Nb content in Ti-Ni-Nb brazing alloys on the microstructure and mechanical properties of Ti-22Al-25Nb alloy brazed joints
Y. Wang; X.Q. Cai; Z.W.Yang*; D.P. Wang; X.G. Liu; Y.C. Liu
Journal of Materials Science & Technology, 2017, 33(7): 682-689
2017 SCI Q1 IF 14.3 被引 41
Zirconia ceramic and Nb joints brazed with Mo-particle-reinforced Ag-Cu-Ti composite fillers: Interfacial microstructure and formation mechanism
N. Wang; D.P. Wang; Z.W. Yang*; Y. Wang; X.G. Liu
Ceramics International, 2017, 43(13): 9636-9643
2017 SCI Q1 IF 5.6 被引 43
Microstructure and mechanical properties of Al2O3/TiAl joints brazed with B powders reinforced Ag-Cu-Ti based composite fillers
G.B. Niu; D.P.Wang; Z.W.Yang*; Y.Wang
Ceramics International, 2017, 43(1): 439-450
2017 SCI Q1 IF 5.6 被引 70
Al2O3陶瓷与TiAl合金真空钎焊接头界面组织及性能
牛国宾, 王东坡, 杨振文*, 王颖
稀有金属材料与工程, 2017, 46(11): 3282-3287
2017 EI 被引 18
Microstructure and mechanical properties of SiO2-BN ceramic and Invar alloy joints brazed with Ag-Cu-Ti + TiH2+ BN composite filler
Y. Wang; Z.W. Yang*; L.X. Zhang ; D.P. Wang; J.C. Feng
Journal of Materiomics, 2016, 2(1): 66-74
2016 SCI Q1 IF 9.6 被引 22
Microstructure evolution and mechanical properties of Ti-22Al-25Nb alloy joints brazed with Ti-Ni-Nb alloy
Y. Wang; X.Q. Cai; Z.W. Yang*; Q.W. Qiu; D.P. Wang; Y.C. Liu
Materials Chemistry and Physics, 2016, 182(0): 488-497
2016 SCI Q2 IF 4.7 被引 24
Microstructure Evolution and Mechanical Properties of Ti-43Al-9V-0.3Y Alloy Joints Brazed With Ti-Zr-Ni-Cu plus Mo Composite Filler
Y. Wang; Q.W. Qiu; Z.W. Yang*; D.P. Wang
Advanced Engineering Materials, 2016, 18(6): 944-952
2016 SCI Q2 IF 3.3 被引 6
Transient liquid phase (TLP) bonding of Ti2AlNb alloy using Ti-Ni interlayer Microstructure characterization and mechanical properties
X.Q. Cai; Y. Wang; Z.W. Yang*; D.P. Wang; Y.C. Liu
Journal of Alloys and Compounds, 2016, 679(0): 9-17
2016 SCI Q1 IF 6.3 被引 68
Microstructure and mechanical properties of Al2O3 ceramic and Ti6Al4V alloy joint brazed with inactive Ag-Cu and Ag-Cu plus B
Q.W. Qiu; Y. Wang; Z.W. Yang*; D.P. Wang
Journal of the European Ceramic Society, 2016, 36(8): 2067-2074
2016 SCI Q1 IF 6.2 被引 63
Microstructure and mechanical properties of TiAl alloy joints vacuum brazed with Ti-Zr-Ni-Cu brazing powder without and with Mo additive
Q.W. Qiu; Y. Wang; Z.W. Yang*; D.P. Wang
Materials & Design, 2016, 90(0): 650-659
2016 SCI Q1 IF 7.9 被引 77
Interfacial microstructure and mechanical properties of zirconia ceramic and niobium joints vacuum brazed with two Ag-based active filler metals
N. Wang; D.P.Wang; Z.W.Yang*; Y.Wang
Ceramics International, 2016, 42(11): 12815-12824
2016 SCI Q1 IF 5.6 被引 58
Microstructure and mechanical properties of Al2O3 ceramic and TiAl alloy joints brazed with Ag-Cu-Ti filler metal
G.B. Niu; D.P.Wang; Z.W.Yang*; Y.Wang
Ceramics International, 2016, 42(6): 6924-6934
2016 SCI Q1 IF 5.6 被引 77
Simulation of Dynamic Behavior and Prediction of Optimal Welding Current for Short-Circuiting Transfer Mode in GMAW
Wang Y, Wang L J, Lv X Q
Journal of Maunfacturing Science and Engineering, 2016, 138(6): 61011
2016 SCI Q2 IF 2.9 被引 7
Development of ZrF4-containing CsF-AlF3 flux for brazing 5052 aluminium alloy with Zn-Al filler metal
Xiao B, Wang D P, Cheng F J*, Wang Y
Materials & Design, 2016, 90: 610-617
2016 SCI Q1 IF 7.9 被引 21
Correction of buckling distortion by ultrasonic shot peening treatment for 5A06 aluminum alloy welded structure
He Y. Z., Wang D. P., Wang Y.*, Zhang H.
Transactions of Nonferrous Metals Society of China, 2016, 26(6): 1531-1537
2016 SCI Q1 IF 4.7 唯一通讯 被引 26
基于Neuber公式的焊接制造对运载火箭储箱承载力的影响
林一桐, 王东坡, 王颖
焊接学报, 2016, 37(1): 51-54
2016 EI 被引 5
Low-temperature diffusion brazing of actively metallized Al2O3 ceramic tube and 5A05 aluminum alloy
Y. Wang; Z.W. Yang*; L.X. Zhang; D.P.Wang; J.C. Feng
Materials & Design, 2015, 86(0): 328-337
2015 SCI Q1 IF 7.9 被引 39
Oxide film on 5052 aluminium alloy: Its structure and removal mechanism by activated CsF-AlF3 flux in brazing
Xiao B, Wang D P, Cheng F J*, Wang Y
Applied Surface Science, 2015, 337: 208-215
2015 SCI Q1 IF 6.9 被引 24
Creep Behaviors of Sn0.7Cu0.1Co0.05Ni/Cu Soldering Joints
Cheng F J, Ma Z L*, Wang Y, Zou Q B
IEEE Transactions on Components, Packaging and Manufacturing Technology, 2015, 4(12): 2058-2065
2015 SCI Q2 IF 3 被引 3
Structure and composition of oxide film on 5083 alloy at brazing temperature
F.J. Cheng; J.F. Yao; Z.W. Yang*; Y. Wang; B. Xiao
Materials Science and Technology, 2015, 31(11): 1282-1287
2015 SCI Q2 IF 2.2 被引 8
2219铝合金VPTIG焊接头的低温断裂韧性
林一桐, 王东坡, 王颖
天津大学学报(自然科学与工程技术版), 2015, 48(5): 468-472
2015 EI 唯一通讯 被引 8
Invar合金与Si3N4陶瓷钎焊接头界面组织和性能研究
王颖, 杨振文*, 张丽霞, 冯吉才
稀有金属材料与工程, 2015, 44(2): 339-343
2015 EI 被引 18
扩散连接技术在核聚变反应堆包层模块制造中的应用
刘晨曦, 刘永长*, 周晓胜, 马宗青, 王颖
精密成形工程, 2015, 7(1): 2025/1/8
2015 被引 15
Effect of post weld heat treatment on the microstructure and corrosion behavior of AA2219 aluminum alloy joints welded by variable polarity tungsten inert gas welding
Z.Y. Zhu; C.Y. Deng; Y. Wang; Z.W. Yang*; J.K. Ding; D.P. Wang
Materials & Design, 2014, 65(0): 1075-1082
2014 SCI Q1 IF 7.9 被引 67
Effect of post weld heat treatment on properties of variable polarity TIG welded AA2219 aluminium alloy joints
Ding J. K., Wang D. P., Wang Y.*, Du H.
Transactions of Nonferrous Metals Society of China, 2014, 24(5): 1307-1316
2014 SCI Q1 IF 4.7 唯一通讯 被引 36
Surface alloying method of ultrasonic shot peening on iron surface
Zhang T, Wang D P, Wang Y*, Deng C Y, Gong B M
Applied Surface Science, 2013, 265: 671-676
2013 SCI Q1 IF 6.9 唯一通讯 被引 14
EH36钢焊接接头在超长寿命区间的疲劳性能
王颖, 宋宗贤, 王东坡, 邓彩艳*, 赵小辉
天津大学学报(自然科学与工程技术版), 2013, 46(5): 453-457
2013 EI 被引 5
超声表面滚压加工40Cr表层的纳米力学性能
刘宇, 王立君, 王东坡, 王颖*
天津大学学报, 2012, 45(7): 656-661
2012 EI 唯一通讯 被引 82
焊缝CTOD试验中的Pop-in效应及产生原因
吴世品, 王东坡, 邓彩艳, 王颖*
焊接学报, 2012, 33(4): 105-108
2012 EI 唯一通讯 被引 13
火焰喷熔涂层与焊接接头性能研究
赵小辉, 王东坡, 邓彩艳, 王颖*, 徐艳
天津大学学报, 2012, 45(3): 254-258
2012 EI 唯一通讯
熔化极脉冲焊设备及其在焊管生产中的应用前景
李桓, 高莹, 凌礼恭, 许贞龙, 王颖
焊管, 2010, 33(2): 40-44
2010 被引 1
Al2O3陶瓷与5A05铝合金的间接钎焊工艺
徐富家, 张丽霞*, 冯吉才, 王颖, 王克强
中国有色金属学报, 2010, 20(3): 463-468
2010 EI 被引 31
TLP bonding of alumina ceramic and 5A05 aluminum alloyusing Ag-Cu-Ti interlayer
Wang Y., Cao J., Feng J. C.*, Zhang L. X., Xu F. J.
China Welding, 2009, 18(4): 39-42
2009 被引 8
氧化铝陶瓷与金属活性钎焊研究进展
王颖, 曹健, 张丽霞*, 冯吉才
焊接, 2009, 2: 56-60
2009 被引 24
Microstructure of alumina ceramic/Ag–Cu–Ti brazing alloy/Kovar alloy joint
Wang Y., Feng J. C., Zhang L. X., He P., Zhang J. H.
Materials Science and Technology, 2007, 23(3): 320-323
2007 SCI Q2 IF 2.2 被引 24
接头形式对陶瓷/金属连接残余应力的影响
王颖, 何鹏, 冯吉才, 张丽霞, 顾小龙, 王大勇
焊接学报, 2007, 28(4): 13-16
2007 EI 被引 15
Al2O3陶瓷/AgCuTi/可伐合金钎焊接头力学性能
顾小龙, 王大勇, 王颖, 张丽霞, 冯吉才*
材料科学与工艺, 2007, 15(3): 366-369
2007 被引 21